The protective corner packaging is gradually becoming an effective assistant for the protection of 4*8′(1220*2440mm),1/2”(12.7mm) ground protection mats.

   In the field of architecture,4*8′(1220*2440mm),1/2”(12.7mm) construction mats is a common material, and its protection during transportation and storage is very important.

   Protective corner packaging is usually made of sturdy paper or plastic. Its clever right – angle design can perfectly fit the corners of 4×8 ft (1220×2440 mm), 1/2 in (12.7 mm) construction mats. During transportation, these construction mats are bound to be hit and squeezed.  

   The protection angle is like a solid shield.When encountering external impact, it can disperse the pressure and effectively avoid the damage of the corner of the 4*8′(1220*2440mm),1/2”(12.7mm) construction mats caused by collision, such as cracking and deformation.

   For example, in long-distance transportation, the bumps and vibrations of trucks are easy to make 4*8′(1220*2440mm),1/2”(12.7mm) construction mats rub and collide with each other.With the protection angle, this loss can be greatly reduced.Economically speaking, the cost of protective corner packaging is not high.

   However, it can significantly reduce the economic losses caused by the damage of 4×8 ft (1220×2440 mm), 1/2 in (12.7 mm) construction mats. In the past, without protective corner packaging, 4*8′(1220*2440mm),1/2”(12.7mm) construction mats could be easily damaged during handling and couldn’t be used normally.They had to be thrown away or re – processed, which surely increased the construction costs.

   Now, with the use of protective corner packaging, the damage rate of construction mats has been greatly reduced.This not only saves resources but also improves economic benefits.